Configuration License; Unlocking The Limiter - Dateq Spl-5Mk2 Handbuch

DATEQ SPL-5 MK2 manual
16 Installation UK

Configuration license

The configuration software are commonly only used to view settings and read sound sample
logging. For viewing or exporting no license or password is required. Changing settings, including
first installation an installer license and password is required.
The installer license is only granted to certified professional audio installers. When you own an
SPL limiter and settings need to be changed, you need to contact your local distributor or installer.
The closest supplier can be found at the Dateq selling points part of the website: www.dateq.nl.
An installer license is linked and registered to the installing company and should not be transferred
to third parties. The installer license contains all company and contact details, that will be stored
into the SPL limiter during configuration.

Unlocking the limiter

Before changes can be made the license password must be entered.
This password is linked and stored within the license file SPL5.DSR.
The license file SPL5.DSR must be copied into the folder that contains the software.
If no valid license is detected the software will display this.
Please note; a valid license file must be installed before starting the software.