Installation; Configuration; Connecting The Computer - Dateq Spl-5Mk2 Handbuch

DATEQ SPL-5 MK2 manual
UK

Installation

The SPL-5 MK2 configuration software is compliant with the following operating systems:
Windows 8
•
Windows 10
•
Windows 11
•
Apple OSX, Linux and other operating systems are not supported. Minimum display resolution
1400 * 1050 pixels.
Always use the latest software and firmware release that can be found at www.dateq.nl.

Configuration

In this chapter the configuration and system settings for the SPL-5 MK2 are explained. These
settings normally are made once on installation. All made settings can be stored in a backup file
for later use or restoring the original settings after changing.

Connecting the computer

The computer is connected to the display using a a standard USB-A to USB-B cable. After
connecting the SPL-D3 to your computer the standard windows drivers will be loaded. No extra
drivers are needed, they are included in your windows operating system.
On first connection installation of the standard windows
drivers can take several minutes depending on your
operating system.
Installation
15