Safety Instruction - piezosystemjena FSM1x6 Bedienungsanleitung

4. safety instructions
Please check the completeness of the delivery after receiving the shipment:

fiber switch

USB-, RS232- or BCD-cable depending on the fiber switch type

instruction manual

CD-ROM with drivers

5. safety instruction


Do not open the units! The warranty will be lost when the unit is opened!

There are no user serviceable parts inside and opening or removing covers may
expose you to dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.

Do not spill any liquids into the connectors or use the units near water.

Do not place any heavy objects on any cables (e.g. power cords, optical cables).
Damage may cause malfunction, shock, or fire! Do not bend the optical cables.

Do not place the units on a sloping or unstable cart, stand, or table as they may
fall or not work accurately.

Only work with the units in a clean and dry environment! Do not use the switch
under rough environmental conditions, they are designed for lab applications
only.

Please only use original parts from piezosystem jena.

piezosystem jena does not give any warranty for damages or malfunction
caused by additional parts not supplied by piezosystem jena. Additional cables
or connectors will change the specified data. This can change the specified
properties of the units and cause them to malfunction.

Fiberswitches are sensitive systems. They will demonstrate their excellent
properties only if they are handled correctly! Please mount them properly, only at
the special mounting points.

Please contact piezosystem jena or your local representative, if there are any
problems with your fiberswitch.
Immediately unplug your unit from the power supply and refer servicing to
qualified service personnel under the following conditions:

when the power supply cord, connector, or optical cable is damaged

if the unit has been exposed to rain or water

if the unit has been dropped or the housing is damaged
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
16