BERG B23 Produkthandbuch Seite 75

Energiezähler B-Serie
Kommunikation mit Modbus
Ausschalten eines Impulsausgangs
Befolgen Sie die Schritte in der Tabelle unten, um einen Impulsausgang auszuschalten:
Step
1
2
Lesen der Impulsausgang-Konfiguration
Befolgen Sie die Schritte in der Tabelle unten, um die aktuelle Impulsausgangkonfiguration zu lesen:
Step
1
2
3
4
5
6
Action
Select the pulse output instance to configure by writing a number to the Pulse output instance register.
Allowed values are 1...4.
Write the value 1 to the Turn off pulse output register.
Action
Select the pulse output instance to read configuration for by writing a number to the Pulse output instance
register. Allowed values are 1...4.
Read the Port number register to get the I/O port number used by the selected pulse output instance.
Read the Energy quantity registers to get the OBIS code of the quantity used for the selected pulse output
instance.
Read the Pulse frequency active or reactive energy registers, depending on the selected energy type, to get
the pulse frequency used by the selected pulse output instance.
Read the Pulse length registers to get the pulse length used by the selected pulse output instance.
Repeat steps 1 to 5 for all pulse outputs.
B2x xx.xxx.x.1 | 2CDC 512 084 D0101 73