Stage6 S64080/OR Montage- Und Bedienungsanleitung Seite 23

• As soon as the scooter moves, the
A NOTE
To find out how to adjust the Power
STAGE6 • •
Test timer settings, please see 4.2.
The timer is automatic, so
when your bike starts to
move, the timer will start
to count the time and
stop automatically after
you stopped the bike.
A
3
STACEE
• Once the target distance has been
63
•To perform another test, press the
STACEE
NOTE
In order to save a record and get back to the main screen, press
and hold the Select Button for 3 seconds.
If you stop accelerating
during the test or want
to stop the test, press
the Adjust Button to stop
the timer. Then press the
Adjust button to clear
the record and enter the
target distance timer again.
5.3 Top Speed Test
• In the main screen, press and hold
switch
STAGES
timer will start automatically.
100 m
Will keep flashing
throughout the test.
reached, the timer will stop counting
automatically.
Adjust Button to clear the record and
enter the target distance timer again.
the instrument to timer mode.
AWARNING
- rac
Please only use this function
race tracks
• In the Power Test screen, press the
STAGES
Select Button 3 times to enter the top
speed test screen.
A
A NOTE
Please start the test while the scooter is standing still.
• Press the Adjust Button to clear the
record and enter the top speed timer.
• E.g.: The stored record is displayed:
the top speed was 180 km/h, the time
needed was 10.20 s, the distance
STAGE6
needed was 510 m. During the test,
the max RPM was 10,000.
A NOTE
In order to save a record and get back to the main screen, press
and hold the Select Button for 3 seconds.
•As soon as the scooter
timer will start automatically.
STAGEC
A NOTE
The top speed test range:
0-360 km/h; distance: 0-999 m (3280 ft.);
RPM: 0-10.000/20.000 RPM; timer: O-9:59.99
The timer is automatic, so
when your bike starts to
move, the timer will start
to count the time and
stop automatically when
you stop the bike or when
the speed decreases.
A
3
STAGES
• Once a new top speed has been
reached, the timer will stop counting
distance
• To perform another test, press the
Adjust Button to clear the record and
STAGE6 •
enter the top speed timer again
on
to avoid accidents!
If there already is a power test
record stored, it will be displayed
now, Before starting a new test,
the Old record Will have to be
cleared.
moves, the
The setting unit is automatically
changed together with the speed
unit (see 4.2).
min.
dup 180 km/h
000 130
will keep flashing
throughout the test.
and time.
23