amazon basics B0BVM1PSYN Bedienungsanleitung Seite 7

Automatically Connect to a Previous Device
1. Make sure that your headphones and Bluetooth device
are within 3.3ft (1m) of each other.
2. Press and hold
headphones turn on and reconnect to the last
connected device.
Switching Between Two Bluetooth Devices
You can pair to and switch between two audio sources.
1. Make sure that your headphones and Bluetooth
devices are within 3.3ft (1m) of each other.
2. While paired to your first Bluetooth device, press and
hold (function) and
A tone sounds and multi-point connection turns on.
3. Select Amazon Basics BT Headset from the pairing list
on your second Bluetooth device.
4. To switch between audio sources, press
(function) to pause your current audio device, then
press play on your second Bluetooth device.
Notes:
» If one of your Bluetooth devices goes out of range or
turns off, you may need to reconnect the remaining
device.
» Phone calls take priority when connected to two
Bluetooth devices.
(power) for two seconds. The
(volume up) for two seconds.
EN
7