Charging The Headphones; Using The Headphones - Amazon Basics B0Bvm1Psyn Bedienungsanleitung

EN

Charging the Headphones

Connect the charging cable from the headphones' USB-C
port to a power source (not included).
Notes:
» Do not use the headphones while charging.
» To preserve the battery, make sure that the
headphones are charged at least once every three
months.
USB-C charging port

Using the Headphones

Pairing to a New Device
1. Make sure that your headphones and Bluetooth device
are within 3.3ft (1m) of each other.
2. Press and hold
headphones turn on and enter pairing mode for
two minutes. The status LED flashes blue, and the
headphones say "Pairing."
3. With your Bluetooth device, turn on Bluetooth and
select Amazon Basics BT Headset from the pairing list.
The status LED turns solid blue, and the headphones
say "Connected."
Note: If pairing fails, repeat these steps to pair again.
See "Troubleshooting" on page 8 for more help.
6
Charging cable
(power) for two seconds. The
Power source
(not included)