STIER SP-Basic+ Betriebsanleitung Seite 13

use. The manufacturer assumes no liability for any damage caused by improper or incorrect use. Keep the
safety and operating instructions carefully for future use. However, the instructions in this manual do not
replace standards or additional regulations (not even statutory) issued for safety reasons.
THANK YOU FOR CHOOSING STIER.
STIER tool is durable, powerful and resistant. Whether workshop supplies, compressed air or fastening
technology, hand tools or material processing: the wide STIER range offers real professional quality for all your
challenges.
GOOD LUCK WITH YOUR PROJECT.
@stier_official
@STIER. Tool
@STIER. Tool
DISPOSAL
This old equipment can be handed in to a disposal point, where it is disposed of in accordance with the national
Circular Economy and Waste Act. The device and its accessories are made of a wide variety of materials.
Defective components must be treated as hazardous waste and disposed of in accordance with legal
requirements.
Before disposing of the product, consider ways to avoid waste (e.g., dispose of functional products or repair)
in
Consideration. Remove all equipment from the product (oil, fuel). Remove batteries / rechargeable batteries
and lamps / lamps from the product before disposal if this is possible non-destructively. Private end customers
can hand in the product for disposal at a public collection or return point in their area. Addresses of suitable
collection points can be obtained from the city or local administration. Commercial end customers can hand in
the product for disposal at one of the following locations: Manufacturer.
RESERVATION OF RIGHTS
STIER Industrial GmbH is not liable for the loss of data on sent devices. All indications known as trademarks or
service marks are highlighted accordingly. The use of this information should not affect the validity or
reputation of the trademarks or service marks. STIER Industrial GmbH reserves the right to make changes,
deletions or additions to the information or data provided if necessary. Technical data, specifications and
appearance are subject to change without notice and may differ in the representations from the actual product.
Copyright 2025 STIER Industrial GmbH. STIER and the STIER logo are registered trademarks of STIER Industrial
GmbH
ONLINE MANUAL
By scanning the following QR code, you will get to the digital version of the operating manual. Please enter the
manufacturer number (903026) in the search field.
Before use
• Attach the interchangeable cup to the head of the spray gun with the help of the enclosed open-end wrench. Make sure that the cup is
firmly fixed to the gun. Also install the spray nozzle.
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlin | DE | info@stier.de 13