LANCOM GS-2326+ Installationsanleitung Seite 30

displayed in the list, including LANCOM switches. Double-click on this
entry to start the browser automatically with the correct IP address.
What is the IP Address of my LANCOM Switch?
The current IP address of the LANCOM switch after being switched on
depends on the network constellation.
A a Networks with DHCP server – In its factory settings, the LANCOM
switch is set for auto DHCP mode, meaning that it searches for a DHCP
server to assign it an IP address, subnet mask and gateway address.
The assigned IP address can only be determined by using the appro-
priate tools (e. g. LANconfig) or via DHCP server. If the DHCP server is
a LANCOM device, the IP address of the LANCOM switch can be read
out from the DHCP table. If this is the case, the LANCOM switch can be
accessed from any network computer that receives its IP address from
the same DHCP server.
A Network without a DHCP server – If no DHCP server is present in the
network, the LANCOM switch adopts an address which, depending on
the model, may be 172.23.56.250 or 172.23.56.251. If this is the case
the LANCOM switch can be accessed from any network computer with
its IP address set to the address range 172.23.56.x.
LANCOM Management Cloud
In order to configure a LANCOM switch via the LANCOM Management
Cloud (LMC), it must first be integrated into the LMC.
Integrating the switch into the LMC requires the switch to be connected to
the Internet and able to reach cloud.lancom.de.
There are two different methods of integrating a LANCOM device into the
LANCOM Management Cloud:
LANCOM Installation Guide Switches – Configuration
31