LANCOM GS-2326+ Installationsanleitung Seite 27

Category 5e or 6 with maximum length of 100 meters is recommended
for 1000BASE-T
A Protection from radio frequency interference emissions
A Electrical surge suppression
A Separation of electrical wires and data – based network wiring
A Safe connections with no damaged cables, connectors or shields
Package Content and Accessories
Before beginning with the installation, please check that nothing is missing
from your package. Along with the LANCOM switch the box should contain
the following accessories:
A Power cord
A 19'' adapter (2 pieces) and mounting materials
A Serial cable (model dependant)
A Printed documentation
Should anything be missing, please immediately contact to your dealer or
the address on the delivery note supplied with your device. Ensure that you
have all accessories at hand which might be required during installation.
Mounting and Connecting the LANCOM Switch
Installing the LANCOM switch involves the following steps:
A Mounting – The device is designed for mounting in an available 19"
unit in a server cabinet. Make use of the supplied mounting brackets
for 19" cabinets. If necessary fix the rubber pads to the underside of
the device to prevent any scratching to other equipment.
28