Connecting To The Tv - Samsung SEK-2500U Bedienhandbuch

Inserting Batteries into the Samsung Smart Control
To use Samsung Smart Control, first refer to the figure below and insert batteries into the unit.
- We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance may differ depending on the wireless environmental
conditions.
Gently pull on the battery cover's notch and then remove the cover completely once it comes loose.
1
Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
2
Place the battery cover on the remote control and insert the top part of the cover into the remote control.
3
Press the catches on both sides of the battery cover in the order shown so that the cover is completely attached to the remote control.
4

Connecting to the TV

Press the TV button on the Samsung Smart Control to turn on the TV. The Samsung Smart Control connects to the TV automatically. If this is the first time you
have turned on the TV, the Initial Setup screen appears. Follow the directions on the screen to set up the TV.
English-7