Troubleshooting
Troubleshooting
Error Codes
Error Codes
If your device is having an error, it will indicate it by flashing red-
If your device is having an error, it will indicate it by flashing red-
white lights:
white lights:
No chamber (
No chamber (
Remove and reinsert chamber.
Remove and reinsert chamber.
Chamber error (
Chamber error (
Remove and clean chamber before reinserting.
Remove and clean chamber before reinserting.
Device overheating (
Device overheating (
Allow device to cool before using.
Allow device to cool before using.
Low battery (
Low battery (
Ensure device is fully charged before using.
Ensure device is fully charged before using.
General Warnings
General Warnings
Do not overfill the chamber.
Do not overfill the chamber.
Do not blow or exhale hard into the glass.
Do not blow or exhale hard into the glass.
Strong inhales may cause spillage and damage to your chamber.
Strong inhales may cause spillage and damage to your chamber.
Do not charge or operate below 32° F or above 100° F.
Do not charge or operate below 32° F or above 100° F.
Use only with the provided cable.
Use only with the provided cable.
Keep away from moisture and high humidity.
Keep away from moisture and high humidity.
Store in a cool dark place when not in use.
Store in a cool dark place when not in use.
During use the chamber is hot (burn hazard).
During use the chamber is hot (burn hazard).
Please allow product to cool down 10-minutes between
Please allow product to cool down 10-minutes between
heating cycles.
heating cycles.
Not for use with tobacco, nicotine containing e-liquids,
Not for use with tobacco, nicotine containing e-liquids,
or any synthetic nicotine or nicotine substitute.
or any synthetic nicotine or nicotine substitute.
09
)
)
)
)
for 5 seconds)
for 5 seconds)
)
)