Puffco PROXY Bedienungsanleitung Seite 9

Cleaning Cleaning
3D Chamber 3D Chamber
Base Base
07
Unscrew the 3D Chamber from base, then Unscrew the 3D Chamber from base, then
remove the Joystick with Jacket & Tether. remove the Joystick with Jacket & Tether.
Use a cotton swab to gently remove any Use a cotton swab to gently remove any
residue with 90%+ isopropyl alcohol. residue with 90%+ isopropyl alcohol.
Submerge the chamber in 90%+ isopropyl Submerge the chamber in 90%+ isopropyl
alcohol for 20 minutes. Air-dry completely alcohol for 20 minutes. Air-dry completely
before reattaching. before reattaching.
Do not rinse with water. Do not rinse with water.
Allow chamber to cool completely before handling. Allow chamber to cool completely before handling.
Isopropyl alcohol is highly flammable; allow Isopropyl alcohol is highly flammable; allow
chamber to air-dry completely before reattaching. chamber to air-dry completely before reattaching.
Remove glass and chamber from base. Remove glass and chamber from base.
Use a cotton swab soaked in 90%+ Use a cotton swab soaked in 90%+
isopropyl alcohol to gently clean the isopropyl alcohol to gently clean the
contact points and air path. contact points and air path.
Allow to air-dry completely before Allow to air-dry completely before
reattaching components. reattaching components.
DO NOT rinse or submerge in liquid. DO NOT rinse or submerge in liquid.