RODE PSA1+ Schnellstartanleitung Seite 2

SCAN FOR
MORE INFO
ENGLISH
Remove the PSA1+ and its components from the
box and carefully extend the arm
Using the Desk Mount Clamp
1. Place the desk mount on the edge of your desk
and affix it by tightening the clamp beneath it
clockwise.
2. Place the end of the PSA1+ arm (the end that
does NOT feature a screw thread) into the base
of the desk clamp.
Using the Threaded Desk Mount
1. The threaded desk mount requires a hole in your
desk 50-80mm in diameter.
2. Place the top metal baseplate (with the extended
thread) on the top of your desk, with its thread
facing down through the hole.
3. Place the bottom baseplate beneath your desk
and then secure it in place with the included nut
by tightening it clockwise.
4. Place the end of the PSA1+ arm (the end that
does NOT feature a screw thread) into the base
of the threaded desk mount.
Mounting Your PSA1+ and Microphone
1. Attach your microphone using the screw thread
on the end of the PSA1+, using the included 3/8"
to 5/8" adaptor if required.