VEVOR PY0805-WD Bedienungsanleitung Seite 8

Keep warm
time
Notice:Connect the power supply,while the light of three buttons flickering in the
meanwhile,it is ready mode.Firstly,Press button"M"to choose desired function,such
as white tea at 170F(77C),secondly,press the button"Heat preservation" to reach
the preset temperature and start warm function.
Caution
Over heating protection,Over-heating exceed 105℃ from the sensor,the
power on/off flickering red light,while it is buzzer 10 alarming.
No altitude sickness,this kettle can work regularly equal to or under 2000m
plateau section.
Memory function,while power on,it can continue working function as last
time.
CARE AND MAINTAINENCE
1. Do not attempt to dismantle the kettle or power base. There are no user
serviceable parts.
For service or repair, contact an authorized electrician.
2. To prolong the kettle's life, please clean the mineral deposits in the kettle
regularly.
3. Always unplug from the plug socket and allow to cool down before cleaning.
4. Do not immerse the power cord, kettle or power base in water.
5. Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of
the kettle as these will scratch the surface and fade the outside color.
6. Periodical descaling is required. The interval of descaling depends on the
hardness of water in your area and the frequency of using the kettle.
7. Fill the kettle with 0.5liter white vinegar and the remainder with water and allow
to stand for at least one hour.
8. Empty the solution from the kettle. Wipe the remaining deposits with a damp
2 Hours(It is without heat preservation default,if the heat
preservation button is not preset.)
- 7 -