VEVOR EHM-P68 Bedienungsanleitung

HYDROGEN WATER KETTLE USER MANUAL
Kettle Body
Hydrogen
Generator
kettle Body
3. Open the lid.
Hold the lid handle and pull up
to remove the lid.
4. You can add tea, fruit or simply boil water
for preparing coffee and food etc.
5. Add appropriate amount of water.
* Please note the maximum and minimum
water level line.
* If the water exceeds the maximum
water level line, it may cause a boiling
overflow.
* Do not add milk, juice etc, which may
cause overflow problem or sticking in the
hydrogen generator.
6. Close the lid tightly.
* Put the lid on the pot and press to make
sure the lid is tight.
7. Switch to adjust heat preservation time.
Clockwise to increase and counterclockwise
to decrease. The working time is 0~12 hours
adjustable.
8. Press once.
Start water heating and hydrogen generaing.
9. When the water temperature reaches the
set temperature, it will stop heating
automatically and enter heat preservation
mode.
9. When heat preserving time is finished, the
kettle will sound a long beep, and stops heating
and hydrogen generating.
11. Standby mode.
Kettle Cleaning
1.Unplug the power plug.
2.After the kettle becoming cool, clean the inside of the kettle
with a damp sponge.
* Note: Do not immerse the kettle body, power cord, plug, nor
the electrical connectors at the bottom of kettle in the water.
3. After each use of making tea or coffee, please clean it in time.
If the input water quality is hard, after using for a longer period,
there may be white scales appearing on the coated heating
plate. The scales can be gently scrubbed with a scouring pad.
* Avoid damaging the coating and avoid scratching by sharp
objects.
To use vinegar:
2.Add about 200ml of water to the kettle, then start boiling
water at 212°F.
3.After the program is over, let it stand for 1 hour, then wipe the
scales off with a scouring pad.
2.Add 10g citric acid, then start boiling water at 212°F.
3.Wait for 5-10 minutes after automatic power off (lf there is a
lot of scales, the standing time can be extended).
4.Finally, pour out the water and wipe the scales off with a scour-
ing pad.
10.The high borosilicate glass material is fragile, and damage is
not covered by the warranty.
*Note: During use, if the water boils dry, it will automatically
enter the anti-dry-burning mode and stop working immediately.
At this time, you need to unplug the power plug, then add an
appropriate amount of cold water, and then you can use it after
the temperature of the heating plate becomes cool.
(Brewing or cooking different foods /
drinks at different temperatures)
Kettle lid
Switch and Button
1. Put the plug into a socket.
2. Place the kettle on the base and
turn it on.
Operation
1. Power on.
2. Standby mode.
3. Press once.
To set heating temperature.
4. Switch to adjust heating temperature
Clockwise to increase and counterclockwise
to decrease.
5. If switch to H
H
kettle will produce hydrogen water without
２
00:05 heating. The working time is 5~30 mins.
6. Press once.
To confirm the heating temperature
setting, and enter the heat preservation
time setting. If setting the time to 00:00,
the kettle won't preserve the temperture
after heating.
Memory Mode (eg.last setting:170 ℉
Heat preserving for 12 hours)
1. Standby mode.
2. Press once.
170℉
Displays last temperature
setting:170℉
170℉
3. Press seciond.
12:00
Displays last holding
timer:12 hours
4. Press third.
(Start heating)
170℉
5. End of heat preserving time.
6. Standby mode.
1. Before use, check that the power supply used is consistent
with the regulations of this product. The power socket used must
have good grounding protection, and do not share a power
socket with high-power electrical appliances.
2. When the product is in use, do not let the power cord come
into contact with sharp-edged objects, and do not get close to
high-temperature objects to prevent danger or damage.
3. The kettle body will become hot during use. When pouring
water, please only hold the handle. Do not touch the kettle body
to avoid burns.
4. The water level in the kettle should not be higher than the
maximum water level line, so as to avoid the hot water over-
flowing and causing accidents.
5. During using, please keep the kettle out of children's reach,
to avoid accidents.
6. During working, the kettle should be placed on a flat and
stable surface.
7. During working, if any problem occurs, please unplug the
power plug first.
8. After using, please unplug the power cord for safety.
9. If the power cord is damaged, stop using the product
immediately to avoid danger.
Product Name
Product Model
Rated Voltage 110-120V/60HZ
Rated Power
Capacity
The product parts contacting with water are all food grade materials.
Screws
Hydrogen generator
Adopt new SPE and PEM (proton mem-
brane electrolysis) technology, to rapidly
electrolyze water into hydrogen and
oxygen separately. Help to turn ordinary
drinking water into hydrogen-rich water.
It will produce hydrogen bubbles from the
bottom hydrogen generator while heating.
Just like using an ordinary kettle, no more
extra steps. Please follow the operating
procedures below.
mode and press once, the
2
Hydrogen Rich Water Kettle
EHM-P68
220-240V/50-60HZ
1100W 1000W
1.5L
Titanium with platinum coating, silicone