Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety regulation
•
Installation has to be conform the manual. Disregard or change of installation can
result on serious damages to people and material for which the manufacturer refu-
ses to accept any liability or obligation under warranty.
•
The windresistance of an open umbrella is limited and related of the anchoring.
Movable base are less stable than installation fixed to the ground.
•
The ground anchorage has to be fitted accoriding the related fitting instruction.
Fitting has to be carried out by a specaialist with construction know-how.
•
The umbrella must not be altered or draped with a different material. Stability,
function and/or closing mechanism may deteriorate.
•
Use only original accessory and spare parts from Shademaker.
•
If the wind freshens up the sunshade must be closed.
•
Unattended sunshades must not be left open!
Installation:
•
Due to the weight of the umbrella, are at least two person required for the installa-
tion.
•
C) Lift complete umbrella including the support tube (1) with two people onto the
fixation (eg.base, In-ground), insert four anchorage screws (20), do not tighten yet.
Lift turning handle (3) to turn the mast, now place the fifth anchorage screw.
•
Adjust umbrella to the required position and tighten the anchorage screws (20).
•
In case umbrella does not stand vertical, loosen the anchorage screws (20) slightly
and adjust with level screws (21) and retighten the anchorage screws.
•
D) Open zipper on protective cover. Slip in the aluminum rod into the pockets next
to the zipper. Protectvie cover can now be lifted over the umbrella easily.
GB
Werbung
Inhaltsverzeichnis
