Care And Maintenance - Beldray Bel0701 Bedienungsanleitung

EN | Please retain instructions for future reference.
Dos and don'ts
DO:
Switch off the steam cleaner and disconnect it from the mains power supply before changing or fitting attachments.
Allow the steam cleaner to cool thoroughly before adding or removing accessories.
DON'T:
Open the water tank cap whilst the steam cleaner is still turned on.
Use attachments if they are loose, damaged or broken.
Use the steam cleaner on frosted or cold glass, as this may damage or crack the glass.
Additional risks
Additional risks may arise when using the steam cleaner, which may not be stated in the safety instructions. These risks
can arise from misuse or prolonged operation of the steam cleaner.

Care and maintenance

Before attempting any cleaning or maintenance, always unplug the steam cleaner from the mains power supply and
allow it to cool sufficiently.
STEP 1: To reduce pressure inside the steam cleaner, press and hold the steam button and allow it to run until all of
the steam has been emitted; loosen the water tank cap to allow any remaining steam to be slowly released. Allow the
steam cleaner to cool sufficiently (for approx. 5 minutes), then remove the water tank cap.
STEP 2: Drain any remaining water from the water tank once the steam cleaner has cooled.
STEP 3: Wipe the steam cleaner with a soft, damp cloth and allow to dry thoroughly.
STEP 4: Clean the accessories in warm, soapy water; rinse and dry thoroughly.
The steam cleaner and its accessories are not suitable for dishwasher use.
Do not use harsh or abrasive cleaners or detergents.
The mini mop head cloth is machine washable on a low heat setting. Always use a mild detergent and lay flat to dry.
Never use bleach or fabric softener when washing the mini mop head cloth.
Descaling the water tank and removing limescale
If living in a hard water area, calcium deposits may begin to build up inside the water tank or accessories. If this occurs,
it is recommended to use demineralised water with the steam cleaner.
Limescale can develop over time and can affect the performance of the steam cleaner. It is recommended to remove
limescale at least once a month. Use a limescale removing solution that is suitable for use with a garment steamer.
Always follow the manufacturer's instructions.
WARNING: Do not leave the steam cleaner unattended whilst removing limescale.
Instructions for use
Before first use
Follow the instructions in the section entitled 'Care and maintenance'.
Assembling the steam cleaner
Accessories can be installed directly onto the end of the general nozzle or flexible hose. The flexible hose provides an
extended reach, ideal for awkward corners and hard-to-clean areas.
Attaching the general nozzle
STEP 1: Holding the steam cleaner steady, push the general nozzle firmly onto the steam cleaner and then twist it in a
clockwise direction to secure it into position.
STEP 2: To remove the general nozzle, twist it in an anticlockwise direction and pull it away from the steam cleaner.
Attaching the flexible hose
STEP 1: Holding the steam cleaner steady, push the flexible hose onto the steam cleaner and then twist it in a clockwise
direction to secure it into position.
STEP 2: To remove the flexible hose, twist it in an anticlockwise direction and pull it away from the steam cleaner.
7