How To Use - Vevor Rtd-10-70 Benutzerhandbuch

5) Range and Precision : 10~20in.lb（±20%）；20~70in.lb(±6%)
6) Screwdriver bit Material and QTY: S2/CrV ; 12pcs ;
7) Screwdriver bit list
Type
Slotted head
Phillips head
Hexagon socket
Torx head
Extension rod
Torsion bar

5 How To Use

Step 1:
Set the torque value of the screwdriver according to the torque required when the
fastener is tightened. When the torque value is preset, hold the hand part first, hold
the hand wheel with the other hand, and move it to the straight circle. Press the
direction and then adjust the hand-wheel clockwise to make the linear scale ring,
let the value of the main scale line and the sub-scale line reach the required torque
value, then release the adjustment hand-wheel and the preset torque value is
completed.
Step 2:
According to the head form of the fastener, select the batch head from the
accessory and insert it into the hexagonal joint of the screwdriver (if there is no
suitable batch head in the attachment, the batch head can be processed by itself.
The size of the hex joint is as shown in the above figure. Show).
List
90-6、38-4、S2-3(Cr-3)
S2PH0、S2PH1、S2PH2
5/64、3/32、5/32
T10、 T15、T20
1pc
1pc
- 4 -