Moes WLS-TD-RGB Benutzerhandbuch Seite 6

Put the battery into the remote controller
Operation
The strip is controlled by the remote controller. For colors and functions, refer to
•
the instructions below:
Always switch off the product using the respective button on the remote control,
•
then disconnect it from the power supply after use.
1. On/Off
2. White/Warm Light Switching
3. Brightness Increase
4. Colorful Transformation
5. Dynamic Effect Switching to Next
6. CS = Red, C3 = Magenta, C7 = Orange, C16 = Yellow
7. Adjusting the Colour Change Style
Control the strip
6