IKOHS CREATE NETBOT S18 LINE Benutzerhandbuch Seite 12

EN
COMPONENT MAINTENANCE
Dust Box
I. Press the dust
take out the dust box.
4. Openthe HEPAFilter cover.
6. Rinse theprimaryfitter.
9. Replacethe primary filter and the HEPAfilter in the dust box.
• Beforeinstalling the filters, pleaseensurethat the HEPAfiter and the primary filter are dry.
• Do not expose the HEPAfilter and primary filter to the sun.
10. Close the Cust box cover and install the dust box in the robot.
Note: Do not allow water to seep into the fan port when cleaning.
2. Openthe dust tox side cover.
box button to
5. Openthe HEPAfilter cover and take out the HEPAfilter and the primary
filter. It is not recommendedto washthe HEPAfilter with water.Tapgently
to remcve the dust.
7. The dust box should be scrubbed
with a mop.
12
3. Dumpingthe rubbish.
8. Dry the dust box and filter as-
sembly and keep it dry to pre-
serve its service life.