Epomaker RT85 Schnellstartanleitung Seite 3

SCREEN CONTROL
Left Screen Page Toggle
FN+←
Right Screen Page Toggle
FN+→
FN+ENTER
Select on-screen / Exit
ON-SCREEN INDICATORS
1. Battery status
2. Current OS (Windows/Mac)
3. Connection mode (Wired/2.4G/BT1-3)
LIGHT INDICATORS
1. Caps：The indicator lights up when Caps Lock is enabled.
2. Win：The indicator lights up when the Windows key is disabled.
WIRED CONNECTION
1. Set switch to center for wireless mode.
2. Plug in the USB-C cable to the Type-C port.
3. When the backlight is on, the keyboard is connected. The current
connection mode will be displayed on the screen.
PAIRING BLUETOOTH
1. Set switch to left for Bluetooth connectivity, make sure the keyboard is in Bluetooth
connection mode.
2. Hold and press FN+Q/W/E until the light indicator flashes quickly, the keyboard is ready
to pair.
3. Open up your Bluetooth device and find the name "RT85 BT5.0 KB" and connect.
4. When the light indicator stop flashing and back to current backlight effect, the keyboard
is connected to your device. The current connection mode will be displayed on the screen.
*Note:
Short press FN+Q/W/E to toggle among Bluetooth device 1/2/3.
CONNECT VIA 2.4G
1. Set switch to right for 2.4G mode, make sure the keyboard is in 2.4G wireless connection
mode.
2. The R key indicator flashes and the 2.4G icon on the screen lights up.
3. Insert the 2.4G receiver to your device.
4. When the R key indicator stop blinking and back to current backlight effect, the
keyboard is connected to your device.
*Note:
To activate pairing mode, press and hold FN+R until the indicator flashes rapidly.