Warranty; Intended Use; Important Safety Instructions - Genie Rc 08 Plus Bedienungsanleitung

EN

Warranty

Dear customer,
We are delighted that you have chosen this equipment. In the case of a defect, please return the
device together with the receipt and original packing material to the point of sale.

Intended use

The paper cutter is suitable only for cutting paper, photos, craft paper, and similar materials. Any other
use or modification is considered improper and poses significant risks of accidents.
Table of contents
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Important safety instructions. . . . . . . . . . . . . . . 5

Instructions for use . . . . . . . . . . . . . . . . . . . . . . 6
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . 6
Installation location / Commissioning . . . . . . . . 6
Select type of cut . . . . . . . . . . . . . . . . . . . . . . . 6
Important safety instructions
Danger! Choking hazard due to small parts, packaging materials and protective film! Keep
children away from the product and its packaging.
Caution! Risk of cuts from sharp blades! Do not touch under the cutting head.
Attention! Material damage due to improper operation! When not in use, place the knife in a
horizontal position / end position. Cut only when the cutting head moves easily.
Attention! Material damage due to improper operation! Remove all staples and paper clips
before cutting.
Attention! Material damage due to improper operation! Do not remove material residues
after cutting with sharp or pointed objects.
Attention! Material damage due to improper operation! Do not carry the device by the
cutting head or the guide bar.
Attention! Material damage possible! It cannot be ruled out that some varnishes, plastics, or
furniture care products may attack and soften the material of the non-slip feet. To avoid
marks on furniture, consider placing a non-slip mat under the appliance if necessary.
Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blade change . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Regularly clean. . . . . . . . . . . . . . . . . . . . . . . . . 7
Notes on disposal . . . . . . . . . . . . . . . . . . . . . . . 7
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Technical changes . . . . . . . . . . . . . . . . . . . . . . 7
Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5