Mooer MICRO PREAMP Bedienungsanleitung

MOCJGR
MICRO PREAMP
O
30
Owner's Manual
o
Precautions
PLEASE READ CAREFULLY BEFORE
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies
negative. Unplug the AC power adapter when not in use or during electrical
Connections
Always turn off the power and all other equipment before connecting
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
• Heat sources
• Direct sunlight
• Magnetic fields • Extreme temperature
• Excessively dusty or dirty location • High humidity
• Strong vibration or shock
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Handling
DO not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive
FCC certification
This device complies with Part 15 Of the FCC Rules. Operation
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
These micro preamps
sections of popular tube amps. We have developed
real tube amplifiers
dynamics and response.
quality power amp to get the best results.
with dual channels,
modes to suit
PROCEEDING
9V
storms.
Or
Or humidity
or moisture
reception interference.
7.LED BUTTON
Press once to switch between
pressure.
Press and hold for 2 seconds
When Cab simulation
is subject 8.FOOTSWlTCH
The footswitch
1.Toggles
2.Switch
To change footswitch
The LED BUTTON will flash twice to confirm the mode has changed.
Overview
are sonically accurate digital recreations Of the preamp
these by directly analyzing
using a brand new technology to capture their sound,
Please ensure to use a clean 9v power supply and a high
Each Micro Preamp comes complete
integrated speaker cabinet simulation and dual operating
the needs of all users.
Pedal la out
1 .DCIN
Connect a DC 9V 300 centre pin
negative power supply
2.1nput
Connect instrument
3.0utput
Connect to power amp or effects return
4.TRE, MID, BASS
Standard tone stack. When
controls are at 12 0'clock the preamp is
closest to the original amplifier
analyzed. Clockwise will boost
frequencies and counterclockwise
cut them. The frequencies which the EQ
controls adjust, vary depending
preamp model.
5.GAlN
Adjusts the input gain
6.VOL
Adjusts the output volume of the
micro preamp
channel AIB (Blue/Red)
to switch Cab simulation on/off
is active the LED BUTTON will flash
has 2 modes of operation
the preamp on/off
between channel AIB (The micro preamp will be permanently
mode, press and hold the footswitch for two seconds.
I.DCIN
Connect a DC 9V 300mA centre pin negative
2.1NPUT
Connect your instrument
Overdrive, distortion, etc.
3.OUTPUT
Connect to a power amp or your amplifier's
(Highly recommend using a tube amplifier)
Different power amplifiers
You can also connect directly to a sound card and activate the speaker cab
simulation for recording
Note: You can connect your "fx loop" effects,
effects, in between the MOOER preamps
(fx return)
AMP
effects return
all 3 Of these
we
will
on the
Input: 1/4" mono audio jack.
Output: 1/4" mono audio jack (Impedance:
Power requirements: AC adapter
Current Draw:300mA
Weight: 160g
Accessories:Owner's Manual
on in mode 2)
Connections
power supply
directly or the output Of your pre, pre-amp effects like
effects return.
will affect the outcome of the final tone.
purposes
like modulation and time based
output and the input of the power amp
MICRO
PREAMP
Delay
: ODIDist
Mooca
Reve r b
Specification
(Impedance: 1 meg Ohms)
100 Ohms)
9V DC center negative.
x 42mm(W) x 52mm(H)
Part No:2030501699