Digitus QIG Bedienungsanleitung Seite 7

Function
Bluetooth
1.
Bluetooth BLEHID pairing: Scan the "BLE HID" pairing code, the
LED flashes quickly, and the light is always on after the pairing is
successful.
Bluetooth BLEpass-through pairing: Scan the "BLE SPP" pairing
code, the LEDflashes slowly, and the light is always on after the
pairing is successful.
Charging
2.
Connect the scanner to USBcable to charge:
When charging the red light on
Charging complete green light on.
Indicator light
3.
Red light on: charging mode
Flashing green: Bluetooth
Green light is always on: pairing succeeded
Prompt instructions
4.
A short beep: The data transmission was successful.
Three short beeps: Pairing failed; data transmission failed.
Three long beeps: Low battery
Long beep for two seconds: Memory is full.
Description
bar code scanner match
pairing
alarm.
7