Xblitz RF500 CAM Handbuch Seite 15

06. INSTALATION
1. Remove the mounting frame from the device and place it in the
dashboard, Perforated the tabs can be folded back with a screwdriver to
ensure a tight fit. The folds must be selected according to the thickness of
the dashboard.
EN
2. Carefully slide the device into a firmly fixed frame. Additional metal
clamps or other means, depending on the vehicle structure fixings may be
necessary The method of attachment may differ from that described in the
manual depending on the vehicle.
3. Connect the wires as instructed Check the connectors on the vehicle are
present compatible with the instructions in this manual. Make sure that all
the wires are properly connected and there are no short circuits. The speaker
wires should be properly connected. If necessary, consult a specialist
DO NOT connect any wires from the speakers to the negative terminal of
the battery/ground (e.g. black vehicle power cord)
4. Turn on the device and make all the settings described above. We wish
you a pleasant and safe journey!
5. CONNECTING THE MICROPHONE AND EXTERNAL CAMERA:
a. To connect an external microphone, connect its plug to the cable on the
back of the radio
ooo
ooo
b. To connect the rear camera, connect the yellow AV plug from the camera to the
bottom one the yellow AV socket.
15