JUNO JCF 84181 Gebrauchsanweisung Seite 44

44 electrolux
Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be
fitted (K).
Place the small square on the guide
again and fix it with the screws
supplied.
Should the lining up of the furniture
door be necessary, use the clearance
of slots.
At the end of operations, it is
necessary to check if the door of the
furniture closes properly.
PR168
8mm
K
Ha
Hb
Fix cover (Hd) on guide (Hb) until
it clips into place.
Hb
Hd
PR167/1
In case of side fixing of the
appliance, it will be sufficient to loose
the screws fixing the bracket (E) and to
position it as shown in figure.
E
E