Vulpes Goods TECH PRO Anleitung Seite 12

Switch the appliance Off immediately if strange
noises occur during use or if the appliance
suddenly becomes very hot
Before setting the value of the tyre pressure,
make sure you select the correct pressure unit,
otherwise
Do not leave the device unattended during
pumping. Monitor the process to prevent the
inflation pressure from getting too high without
setting the standard air pressure.
Use the device in a clean and dry environment.
Sand, dirt or mud may damage the device. The
product can NOT withstand water. DO not clean
the product with water.
12
it could
COPYRIGHT@ALL RIGHTS RESERVED gyvuLPES GOODs•
cause accidents.