8BITDO Ultimate C Kurzanleitung

8BitD0
Ultimate C 2.4G Wireless Controller
home status
star
menu
LS4LTS
d-pad
power LED
RB LB
RT LT
2.4G Receiver -
press home button to turn on the controller. (The controller will stay on the previous mode)
• hold home button for 3 seconds to turn off the controller.
• hold home button for 8 seconds to force the controller off.
O Followthe steps belowto re-pair with the receiver:
1. connect the 2.4G receiverto the USB port Ofyour device
2. press the home button to turn on the controller
3. hold the view button for 5 seconds to enter its pairing mode, the LEDstarts to blink rapidly
4. wait for the controller to automatically pair with the receiver, the LED remain solid to indicate
a successful connection
Windows
required system: Windows 10 (1903) or above.
wireless connection
1. connectthe 2.4G receiver to the USBport ofyourWindows device.
2. press hold X+home to turn on the controller, wait till the controller is successfully recognized by your
Windows device, status LEDstays solid to play.
wired connection
1. press & hold X+home to turn on the controller.
2. connect the controller to your Windows device via the USB cable, wait till the controller is successfully
recognized by your Windows device, status LED stays solid to play.
Android & Raspberry Pi
• OTG support is required on your Android device, please contact your manufacturer for more information.
wireless connection
1. connect the 2.4Greceiverto the USBport ofyour device.
2. press & hold B+home to turn on the controller, wait till the controller is successfully recognized by
your device, status LED stays solid to play.
wired connection
1. press & hold B+home to turn on the controller.
2. connect the controller to your device via the USBcable, wait till the controller is successfully recognized by
your device, status LED stays solid to play.
Turbo function
• status LEDblinks continuously when the button with turbo functionality is pressed.
• D-pad,joysticks are not included.
• hold the button you would like to set turbo functionalityto and then press the star button to
activate/deactivate its turbo functionality.
Battery
25 hours of play time with a480mAh built-in battery pack, rechargeable with 2 hours charging time.
status - LED indicator -
low battery red LED blinks
battery charging red LEDstays solid
battery fully charged red LED turns off.
Support
Please visit support.8bitdo.com for further information & additional support.
8BitD0
English 2.4G
LED home
0
home e
1. 2AG USB
Windows
Windows Windows 10 (1903)
1. 2.4G Windows
2. X+home
1. X+home
2. USB Windows USB
Android Raspberry Pi
Android OTG VJfiE,
1. 2.4G USB
2. B+home
1. B+home
2. USB Android / Raspberry PiiRåfi
iE&VJfiE
25
iEtf-hEU
* iiifilü] support.8bitd0.cn
8BitD0
Ultimate C
home
LSB, LTS
fifi*""
2.4G
0 2 > SD—3—
2.
Windows
Windows T JX —YahCWindows
2.
Android & Raspberry Pi
USB 2. > SO —3—t- Android / Raspberry
support.8bitd0.com
8BitD0
Ultimate
home
LSB, LTS
VI
0
RSB, RTS
LB
2.4G
*71: HOME
* 2.171:HOME
•
O
28t-ä
1.
home
2.
471
3.
4.
Windows
10 (1903) Windows
1.
2. X+home
1. X+home
—3— a-Android / Raspberry Pii/f-fÄDIJSB*— 2. USB
Android & Raspberry Pi
Android
1.
2. B+home*lS
1. B+home
2. USB
• 71=-01
480mAh
support.8bitd0.com*
C 2.4G
o
.eoo'
-31
RSB, RTS
LB
HOME
OH*öIElxl clAl
2.4G MBIPI USB
BI-ICI.
530 •YEH
71Cle4 +AIÄI •SEN
Windows 10 (1903) — 012010-10b
2.4G Windows USB
*GI, AN-SOI
-71S
RlßuHES Android / Raspberry Pi USBY-EOII
ÆÅI-SOI *NI-ICF.
OTG
2.4G USB
*451,
Ah-g-öh04 Windows USB
.ÆAISOI *læLlC .
.ÆAISOI EL-lCh.
XlflähXl
2AlOßLlCh.
A-A1-SOI
EAISOI
A-Algol