Trevi ME 3P70 RC Bedienungsanleitung Seite 5

@ ME3P70RC
DESCRIPTION FUNCTIONS AND CONTROLS
Outdoor temperatureand humidity
2 Sensor low battery indicator
3 Externalsensor signal strength
4. Outdoor temperaturewarning icon
5 C RC signal
6 Alarm clock icon
7 Time display
8. Weather forecast icon
Displaying barometer and pressuretrend
9.
10. Indoor temperatureand humidity
11.Internal temperaturewarning icon
12 Calendardisplay
13. Weeklydisplay
14. Phase Lunar
15. Weather Station Wall Mount Holes
16. Pedestal
17 3xAAAWeatherStationBatteryCompartment ( NotIncluded)
18. USBCharging Socket
19. External Power Socket DC 5V/1A
20.WirelessSignalIndicator(Flashes WhenDataIs Sentto DisplayUnit)
21 Hole for External Sensor Wall Mount
22 TX ChannelSelector, select externalsensor channel
23.Externa l sensorbatterycompartment 2 xAAA(not included)
A. SNZ/LIGHT button
B MODE button
C SET button
D ALARM button
E CH button
F . DOWN button
G. UP button
POWERING ON WEATHER STATION
Ope n the batterycompartment(17) ontheback andinsertthree"AAA" sizebatteries respecting the polaritiesindicated
Alternatively,plug the externalpower supply plug into the plug (19), and the power supply into a mains outlet
POWERING ON EXTERNAL SENSOR
Ope n the batterycompartment(23) ontheback andinserttwo "AAA'sizebatteriesrespecting thepolaritiesindicated.
Note: When the batteries of the external sensor are low, the relevantindicator will be displayed (2).
EXTERNAL SENSOR SETUP
This weather station is set up to communicate with three external sensors. One of these is supplied with the appliance,the
remainingtwo are optional.
1 Powertheweatherstationas describedin theparagraph "POWERING ONWEATHER S TATION"
2 Insertthe batteries intheexternal s ensor, p lacetheselector(22) onthedesired transmissionchannel ( I, 2 or 3). Thedata
will be automatically transmitted to the weather station
3. PresstheCH (E) buttonrepeatedly to selectthe channelset onthe external s ensor.In sequence, c hannel1, channel2,
channel3 or the sequential d isplayof the 3 channels(rotatingarrow icon) is selected.If the signalis not received, t he
character is shown on the display.
Notel: in caseof lackofcommunication betweentheweather stationandtheexternal s ensorit is necessary topresstheCH
(E)button for a long time until the signal reception icon appears on the display from the externalsensor. It is then necessary
to wait a few minutes for the connection to be made. Alternatively,it is necessary to repeat steps 1 to 3 described above.
Note2:Placethe weatherstationat least 1meterawayfrom devicesthatgenerate magneticfieldssuch as mobilephones,
televisions etc .
5
English