Maintenance Instructions - Homend Fanomen Gebrauchsanweisung

into the groove of the blade Screw the spinner counter clockwise to
tighten the blade (
3. After put the center piece of the front grill upright, slip the ring of
the front grill into the another slot of the plastic rim, tighten the bolt in
the joint of the rim by a screwdriver.
OPERATION INSTRUCTION:
Speed control please use "speed" switch to turn "on/off" the fan and
adjust the speed by pushing the switch to the number indicated as
follows.

MAINTENANCE INSTRUCTIONS:

The fan requires little maintenance Do not try to fix it by yourself.
Refer it to qualified service personnel if service is required
1. Before cleaning and assembling, do not plug the pins into the
socket
2. To ensure adequate air circulation to the motor, keep vents at the
rear of the motor housing away from dust, fluff and etc. A vacuum
cleaner can not be used to clean these vents before unplugging. Do
not dismantle the fan to remove fluff
3. Please wipe the exterior parts with a soft cloth soaking a mild
detergent Do not use only adrasive detergent or solvent to avoid
scratching the surface
4. Be careful not to allow water or other liquids to enter the motor
housing or internal parts.
5. If the power cord is damaged, it is strongly recommended to
request a specialist to handle
1 4 F A N O M E N