Technical Data - MediaLas Spooky blue Bedienungsanleitung

Technical data

Operation Voltage:
Optical Output Power:
Wavelength:
Control-Protocoll:
Connection:
Number of Animations:
Required DMX-Channels:
Dimensions approx:
Weight:
DIP-Switches: Selects the DMX Starting-Channel or DEMO mode. When DIP-Switch 10 is ON, the
Spooky Blue Laser projector runs in DEMO mode. During DEMO Mode, the projector
cannot be accessed through external DMX signals.
DMX In: Input for DMX signals
DMX Thru: Output for DMX signals. Daisy-chains several DMX capable devices.
8-PIN: Connects the external Power Supply Unit.
Spooky Blue
90 - 250VAC with external Power Supply
5, 10, 20 or 30 mW
532nm, bright Green, 635nm red
DMX512 Standard
3pol XLR Input – Through
16 x 16 - 1 = 225
2
230mm x 100mm (without wall mount)
approx. 1500g + PSU
Connection Panel of the SpookyBlue.
Seite - 15 -