Install The 1064Nm Infrared Laser Module On The Genmitsu Kiosk - Genmitsu 1064Nm Infrared Laser Module Benutzerhandbuch

Install the 1064nm Infrared Laser Module on the Genmitsu Kiosk

STEP 1 Remove the laser module
1. Turn off the machine's power and open the protective shield.
2. Disconnect the laser module's connection cable.
3. Loosen the fixing screw and remove the laser module.
Disconnect the Laser Module's
Connection Cable
Loosen the Fixing Screw
Loosen the Fixing Screw and
Remove the Laser Module
07