Genmitsu 1064nm Infrared Laser Module Benutzerhandbuch Seite 10

Install the 1064nm Infrared Laser Module on the Genmitsu Kiosk
STEP 2 Install the 1064nm Infrared Laser Module
1. Use the 2mm Allen wrench to unscrew (4) M3 screws and remove the laser slider for the Kortek.
2. Connect the laser adapter cable with the 1064nm infrared laser module.
3. Use (4) M3×6 flat head hex socket screws to secure the laser slider for the Kiosk onto the module.
08
Laser Slider for the Kortek
M3 Screws
2mm Allen Wrench
Connect the
Laser Adapter Cable
(4) M3×6 Flat Head Hex Socket Screw
Laser Slider
for the Kiosk