Genmitsu 1064nm Infrared Laser Module Benutzerhandbuch Seite 5

Safety Instructions
● It is strictly forbidden to place any irrelevant total reflection or diffuse reflection objects in the device to prevent the laser from
reflecting onto the human body or flammable objects.
● The device should be far away from electrical equipment sensitive to electromagnetic interference, which may cause
electromagnetic interference.
● There is high voltage or other potential dangers inside the laser equipment; non-professionals are strictly forbidden to disassemble it.
Notice!
Caution Laser: When the laser is turned on, it is prohibited to aim at humans, animals, and flammables to avoid skin burns and fire.
Do Not Look Directly: The laser brightness is harmful to the eyes. Do not look directly at the laser.
Do not reach in: Keep hands away from the machine during operation to avoid injury.
Cut the power: Turn off the machine when it is not in use to avoid misoperation.
Maintenance and Care
The laser module is consumable. It's recommended to keep the machine power off for 10 minutes after 4 hours of engraving, and
keep the machine power off for 10 minutes after 1 hour of cutting.
Model Name
Laser Wavelength
Laser Life
Input Power
1064nm Infrared Laser Module
1064nm
＞10000h (at 27°C ambient temperature)
Kortek: DC24V 2.5A
Kiosk: DC12V 5A
03