Hama SMART WIRELESS Bedienungsanleitung Seite 7

Establish connection:
• Automatic connection of transmitter and receiver after commissioning / LED lights
up green.
Terminate connection:
• Disconnect receiver or switch off transmitter / Red and green LED flashes alternately.
Noise suppression:
• automatic noise reduction.
Mute:
• press the On-Off switch / green LED stops flashing.
Reverb:
• Double-click the On-Off switch / green LED lights up after the red LED flashes once.
Battery indicator:
• Battery almost empty / Voltage >3.3V / Red LED flashes.
Battery indicator:
• Battery empty / Voltage >3.1V / no more LED display.
Charge battery:
• Connect the USB-C cable / Red LED lights up during the charging process, red LED
goes out when charging is complete.
Receiver:
Switch on:
• Plug the receiver into the device / red LED flashes.
Switch off:
• Disconnect receiver from device / LED does not flash.
Establish connection:
• Automatic connection when plugged in / Red LED lights up continuously.
Terminate connection:
• Transmitter off or too far away / red LED flashes.
6. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh
cleaners. Ensure that no water is able to enter the product.
5