UK
2. CLEANING AND MAINTENANCE
The pump can be cleaned with water and a damp cloth.
Do not use corrosive liquids to clean the pump, as this may damage the product.
3. LIGHT SOURCE: LED
The light source and control gear are not replaceable.
Replacing them would introduce weak points in the construction, which could reduce the product's lifespan.
4. DISASSEMBLY AND DISPOSAL
Camp Light Mode
Long-press to turn the lantern on,
press again to adjust.brightness
If the product is no longer functional, follow the instructions below.
1.
Disconnect the pump from any power source before starting the disassembly process.
2.
Break the unit body using a hammer, or use a sharp tool along the pump's joint to separate the
parts. Remember to wear eye protection.
3.
Disconnect and cut the wires, then dispose of the pump unit, PCB board, charging cable, solar
panel, and wires as electronic waste.
4.
Dispose of the batteries as battery waste.
5.
Dispose of the plastic body and valve adapters as plastic waste.
6.
Dispose of metal components, such as the hanger and screws, as metal waste.
7.
All disposal should be done in accordance with local regulations.
5. TECHNICAL DATA
Input (USB-C): 5V
, 0.8A
Battery: 3.7V
, 2000mAh
LED light: 4V
, 3.5W
Inflation/deflation pressure: 3.5 kPa (0.51 psi)
Rated power: 10W
Class 3 appliance
Outwell Customer Service
e-mail: info@outwell.com
Tel.: +45 70 50 59 00
6
Lesen Sie diese Bedienungsanleitung, bevor Sie das Produkt verwenden.
Bewahren Sie diese Bedienungsanleitung bitte zum späteren Nachschlagen auf.
1.
3.
4.
5.
6.
1) Aufblasanschluss
2) Ablassanschluss
3) Ein-/Ausschalter
4) Ladeanzeige
5) Ladeanschluss
6) Laternenkopf
7) Ventiladapter
DE: BEDIENUNGSANLEITUNG
2.
7
7.