Cycplus M3 Benutzerhandbuch Seite 8

About Settings
For quick setup, open the CYCPLUS Fit app to connect and con gure
the device. Or use buttons to set the device as follows:
Long press [R1 button
Sho press [R1 button
ANT+ Sensors
Temperature Unit
Long press [R1 button
ANT+ Sensors Connection
Press the L button
to sta searching
for ANT+ sensors.
Unpair The Paired Sensors
] to enter settings.
] to cycle through 8 setting pages.
Wheel
Circumference
Facto Reset
] to return to the home page after nishing.
Speed
Hea rate
Power
When the search sta s, the device will
check for four types of sensors: speed,
hea rate, power, and cadence.
If a sensor is detected, its data will be
displayed. If no sensor is found, a
horizontal line will appear in its place.
Go to the C9 page in the settings menu.
Press the L button to unpair all connected sensors.
Time Zone
Odograph
Cadence
6
Speed Unit
Unpair Sensors
The device will
return to the home
page after 10
seconds.