DUROFIX RI20126 Serie Produktinformationen Seite 9

►Reached
► Unreached
Auto Shut-Off the power
Reverse Rotation
Noise value
Vibration value
WARNING
− that the vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (9) and pull
the battery pack (10) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (10) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (1).
2. Make sure the socket is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
CAUTION
1English1
Operating Status Indicator
Green LED Lighting
Red LED Lighting
After 1 Minute of No Use
Green & Red lighting 1 second then off
L = 86.63 dB(A), L
pA
K = 3.0 dB(A), K
pA
a = 10.62 m/s
h
K= 1.5 m/s
ASSEMBLY
Always set switch (5) to off position when installing and removing socket.
English
= 97.53 dB(A)
WA
= 3.0 dB(A)
WA
2
2
-7