Humberg MT3 Bedienungsanleitung Seite 2

EN
Instructions manual
Maximum weight of vehicle handled: 680 kg
Warnings!
• Before installing and using the stand, please read this manual and keep it for future
reference.
• The motorcycle stand is designed only to support a motorcycle, scooter and other
two-wheeled vehicles with a maximum weight of up to 680 kg.
• Do not exceed the maximum load of the stand. Overloading the stand may cause
damage to the stand and cause an accident.
• The stand is intended for private use only.
• For use by an adult only. Keep this stand away from children and persons not autho-
rized/trained to use the product.
• It is forbidden to climb on the stand.
• It is forbidden to sit on the vehicle standing in the stand.
• Store the unused product in a dry room out of the reach of children.
• Before use, inspect the technical condition of the stand. It is forbidden to use a da-
maged or incomplete product.
• Damaged parts must be replaced with new ones immediately.
• It is forbidden to make changes to the rack's design. Use only original spare parts.
• Misuse may cause an accident and endanger the user.
• Lashing straps are required to transport the motorcycle on the stand. Tether straps
are also recommended for upright storage.
• Fastening straps for transport are not included with the rack.
Structure
1. Base (x1)
2. Front wheel holder (x1)
3. Wheel cradle (x1)
4. Cross frame with hooks (x1)
5. Wheel cradle axle (x2)
2
6. R-Pin anchors (x4)
7. Bolt (x3)
8. Washer (x3)
9. Nut (x3)
10. Height-adjustable foot rest (x2)