1English1
When purging around buildings, large stones or vehicles, please make the nozzle
deviate from them. When operating at corners, please purge the corners first and then
move to a wide area. When the blower is running, you can adjust the appropriate output
wind speed by turning the speed control button (C). There are 8 stages of wind speed
that can be rotated
B
C
A
MAINTENANCE
WARNING
Remove the battery pack from this tool before cleaning solutions.
NOTE
This blower is lubricated before it leaves the factory. This lubrication should last for the life
of the tool. No further lubrication is required.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly are solvent
resistant, NEVER use solvent.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories as, Wide Sweeping Nozzle, Nozzle, Extension all kinds of
original batteries and chargers for use with your tool are available at extra cost from
your local service center.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments
should be performed by certified service centers or other qualified service organizations, always using
identical replacement parts.
PROTECTING THE ENVIRONMENT
English
-8