AEG TC7MS181CF Benutzerinformation Seite 25

Set recommended temperature by switching
on ECO function. Refer to "ECO function".
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 h.
After a power failure, the appliance
restores to the set temperature.
3.3 Switching off/on the fridge
compartment
To switch off:
1. Press and hold the fridge temperature
button for 5 sec. The display shows
blinking .
2. Once the fridge compartment is switched
off, the display reads
To switch on:
1. Press and hold the fridge temperature
button for 5 sec. The display shows
blinking .
2. The fridge compartment is switched on
and the previous set temperature is
restored.
3.4 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the ECO
button.
The fridge temperature is set to +4°C and the
freezer temperature to -18°C.
2. To deactivate the function, press the ECO
button again or select a different set
temperature (refer to "Temperature
regulation").
After deactivating the ECO function, the
fridge temperature is set to +2°C and the
freezer temperature to -20°C.
.
Activation of the ECO deactivates Extra
Cool and Extra Freeze functions.
The ECOMETER indicator shows the
appliance's current energy consumption.
Three fully lit bars indicate the most
energy-efficient setup.
3.5 Extra Cool function
This function allows you to rapidly cool large
amounts of warm food without warming food
already stored in the fridge compartment.
To activate the function, press the Extra Cool
button.
The Extra Cool indicator lights up. When the
Extra Cool function is on, the fan may work
automatically.
This function stops automatically after
approximately 6 h. Once the function is off,
the Extra Cool indicator goes out.
Press the Extra Cool button to deactivate the
Extra Cool function before it automatically
ends.
To set a different fridge temperature,
switch off the Extra Cool function.
3.6 Extra Freeze function
Extra Freeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and protects foodstuffs
already stored from warming.
To freeze fresh food, activate the Extra
Freeze function at least 24 h before
placing the food to complete pre-freezing.
Press the Extra Freeze button to activate this
function.
The Extra Freeze indicator lights up. The
Extra Freeze function stops automatically
after a maximum of 52 h.
ENGLISH 25