Werbung
OPERATING INSTRUCTIONS
Step 4:
Fit the rail (3) to the connecting disk (16) and fasten it with 6 washers (68) and 6 screws (58). Fit the 2 buffers (33) to the rail (3)
using 2 screws (56).
Step 5:
Place the adjustable pedals on the pedal sets (13 & 14).
The pedal strap is adjustable and can be individually adapted to the user's foot size.
To adjust the pedal strap, remove the Velcro end of the strap on the mesh side by pulling it upwards and then to the left.
After removal, you can enlarge the opening of the pedal belt by pulling the end of the net upwards and to the right.
To tighten, pull the Velcro end of the pedal strap upwards, then to the right and downwards to attach it to the mesh side of the
strap.
30
Werbung
