Possible Cause; Initial Start-Up - Workers Best Wb 18V-Rss Cpf Bedienungshinweise

PROBLEM
The electric motor heats up to
more than 70 °C.
The machine does not work,
even though it is switched on.
It is difficult to move the jig
saw along the marked line.
The workpiece begins to
vibrate strongly when sawing.
The jig saw is very loud or
functions very irregularly.

Initial start-up

During work, always wear safety goggles, hearing protection, safety gloves and sturdy
work clothes!
1293159 BDA_AKKU_Sä b elsä g e_18 V-RSS CPF.indd 18 1293159 BDA_AKKU_Sä b elsä g e_18 V-RSS CPF.indd 18

POSSIBLE CAUSE

The motor is being overloaded. Saw at a lower speed and let the motor
The motor is defective.
The battery is flat.
The battery is defective.
The device is defective.
The saw blade is bent or dull.
The saw blade is overheated
or has deformed.
The carbon brushes are worn.
18
RECOMMENDED MEASURES
cool off.
Bring the jig saw to your authorised
Workers Best specialist dealer to be
checked and/or repaired.
Charge the battery.
Replace the battery.
Bring the saw to your authorised
Workers Best specialist dealer to be
checked and/or repaired.
Change the saw blade.
(For tight curve radii, use a curved saw
blade.)
Change the saw blade.
Bring the jig saw to your authorised
Workers Best specialist dealer to be
checked.
10.08.23 15:37 10.08.23 15:37