Dangbei DBOX02 Pro Bedienungsanleitung Seite 8

Instructions for Installing External Mount or Stand
Note: When using a dedicated ceiling mount or floor stand, the mount or stand must be purchased separately.
1. Use the Plate for Releasing Screw
included in the package to extract the
two screws from the bottom of the
projector, as illustrated.
Mounting Port
2. Remove the bottom tray module of
the projector. Then take out the mount
interface capsule to expose the
mounting port.
3. Align the projector mount precisely
with the mounting holes on the
bottom of the projector, then secure it
firmly in place.
EN
06