Additional Information; Troubleshooting - Sony KD-84X9005 Bedienungsanleitung

Additional Information

Troubleshooting

When the 1 (standby) indicator is flashing, count how many times it flashes (interval
time is three seconds).
Press "/1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your
dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing, check the items in the tables as
follows.
Also refer to "Troubleshooting" in the i-Manual. If the problem persists, have your TV serviced by
qualified service personnel.
Condition
There is no picture (screen
is dark) and no sound.
Tiny black points and/or
bright points appear on the
screen.
Some programmes cannot
be tuned.
There is no Cable TV
services (programmes)
found.
The TV turns off
automatically (the TV enters
standby mode).
The remote does not
function.
The "Parental Lock"
password has been
forgotten.
The TV surrounds become
warm.
~
When viewing photo files in 4K resolution:
• The menu screen, operation guide or messages may not appear when displaying photos.
• To finish playback of photos, press RETURN, or switch the input by pressing
Explanation/Solution
• Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press "/1 on
the TV.
• If the 1 (standby) indicator lights up in red, press "/1 on
the remote.
• The screen is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a
malfunction.
• Check the antenna (aerial) or dish.
• The satellite cable might be short-circuited or there might
be connection problems of the cable. Check the cable
connection and then turn the TV off with the Mains power
On/Off switch, and turn it on again.
• The frequency that you entered is out of range. Consult the
received satellite broadcasting company.
• Check the cable connection or tuning configuration.
• Attempt the "Digital Auto Tuning" by selecting "Antenna"
instead of "Cable".
• Check if the "Sleep Timer" is activated, or confirm the
"Duration" setting of "On Timer".
• Check if the "Idle TV Standby" is activated.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select "TV Control" and then select
"Home (Menu)" or "Options" to control the TV.
• Enter 9999 for the PIN code. (PIN code 9999 is always
accepted.)
• When the TV is used for an extended period, the TV
surrounds become warm.
You may feel hot when touching there by the hand.
GB
.
27
GB