LENCO Classic Phono TT-34 Benutzerhandbuch Seite 7

PREPARATION FOR USE
UNPACKING AND SET UP
• Carefully remove the unit from the display carton and remove all packing material from the unit.
• Unwind the AC power plug and extend it to its full length.
• Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and away
from source of excess heat, dust, moisture, humidity or strong magnetic field.
• Connect the plug to your AC outlet.
• Raise the lid to expose the phonograph. The phonograph has been secured for shipment with a transit
screw.
• Use a coin or screwdriver to turn the transit screw clockwise. This will allow the turntable to "float".
TRANSIT SCREW
• Remove the opaque while plastic stylus cover from the phonograph stylus by sliding it in the direction of
the arrow.
Discard the stylus cover.
• Remove the twist-tie that was used to secure the tone arm during shipment.
• Release the tone arm lock lever.
• Connect the plug to your AC outlet.
6