Silvercrest HG09937E Bedienungsanleitung Seite 13

˜ Ionization mode
(Fig . B)
/
[ 4 ]
Ionization
(Ion switch)
NOTE: Remove the concentrator nozzle
before using the ionization mode . This optimises
the ionization performance . Use strong air flow
( ) and high heat level (
[ 7 ]
mode to dry hair quickly .
˜ Styling hair
Using the concentrator nozzle
1 . Put the concentrator nozzle
.
10 ] [
2 . Rotate the concentrator nozzle
position .
3 . Switch on the product . Use the concentrator
nozzle to direct the air flow onto a specific
11 ] [
section of the hair .
NOTE: We recommended to use gentle air flow
( ) and low heat level (
[ 7 ]
hair .
m
CAUTION! Do not touch and remove the
concentrator nozzle
Cooling mode
Use the cooling mode to make the hairstyle last
longer:
[ 9 ]
Press and hold button On
Release button
NOTES:
The cooling function (
the heat level is set to "no heat" (
When the product fails to function, switch off and
disconnect the product from power . Let the product
to cool .
10 GB/IE/NI
Ionization
indicator
Off Off
On On
[ 11 ]
) in ionization
8 ] [
on the air outlet
[ 11 ]
to change the
11 ] [
) when styling
[ 8 ]
when it is still hot .
[ 11 ]
Cool air flow
Off
) does not work when
[ 9 ]
) .
8 ] [
˜ Cleaning and maintenance
m
DANGER! Risk of electric shock! Always
switch off the product and disconnect the power
plug from the electrical outlet before cleaning
[ 6 ]
[ 1 ]
the product .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
m
CAUTION! Do not use corrosive or abrasive
cleaning agents or material to clean the product .
˜ Cleaning the housing and the
concentrator nozzle
1 . Remove the concentrator nozzle
outlet .
10 ] [
2 . Wipe the housing and the concentrator nozzle
with a slightly damp cloth . For stubborn soiling,
wipe with a light detergent on the cloth . And dry
all parts thoroughly .
˜ Cleaning the protection grid and
the air inlet
1 . Hold the handle of the product . Rotate the
protection grid
2 . Remove the protection grid
air inlet (Fig . C) .
[ 2 ]
3 . Clean the protection grid
with a dry cloth .
4 . Attach the protection grid
air inlet .
[ 2 ]
5 . Rotate the protection grid
direction to securely attach it onto the air inlet
˜ Storage
Store the product at a cool, dry place, protected
from moisture and out of the reach of children .
Store the product in the original packaging when
it is not in use .
Alternatively, the product can also be hung on its
hanging loop
from the air
[ 11 ]
in a counterclockwise direction .
3 ] [
from the
3 ] [
and the air inlet
3 ] [
back onto the
3 ] [
in a clockwise
[ 3 ]
.
[ 5 ]
11 ] [
2 ] [
.
2 ] [