Dab Reception; Bluetooth; Bluetooth Pairing; Hands-Free Calling - Renkforce Rf-Crdab-100 Bedienungsanleitung

Setting
Button light
Factory reset
Software version

10.3 DAB reception

1. Press the multifunction button "M" repeatedly to enter DAB mode.
2. Press and hold the
3. Rotate the multifunction button "M" to select DAB stations.
4. Press and hold the "PRESET" button to save a station as a favourite.
5. Rotate the multifunction dial "M" to select a preset, then press it to save.

10.4 Bluetooth

Pair the product with your mobile phone via bluetooth to:
■
Recieve voice calls through your car audio system.
■
Stream audio wirelessly from your mobile device to your car audio system.
■
Control voice calls and streaming audio via the product control buttons.

10.4.1 Bluetooth pairing

Preconditions:
a
Bluetooth is enabled on your mobile device (e.g., phone).
a
The device is connected to your car audio system. See section:
1. Press the multifunction button "M" until "Bluetooth" shows on the display.
à
If the display shows "OFF", enable bluetooth via settings:
2. Open Bluetooth on your mobile device and select the product from the menu.
à
The display will show "Connected" when successfully paired.

10.4.2 Hands-free calling

■
You can use the product as a hands-free phone system by establishing a Bluetooth connection with your mobile
phone.
■
When a phone call is received, the device automatically mutes the sound.
■
Press the button
■
2x press the button

10.4.3 Streaming audio

■
If you are connected to your mobile device via Bluetooth, you can stream audio wirelessly.
■
Short press the
20
Description
Switch the button lights ON/OFF.
Reset settings to factory defaults.
Check the device software version.
button to scan for stations.
to answer/end calls.
to recall previous call.
button to play/pause.
Connect to car audio system [} 18]
Menu options [} 19].