Cleaning And Maintenance - Princess 182474 Benutzerhandbuch

Tips
• The correct cooking time depends on the thickness of the food. Times can also vary due to the quantity
and consistency of the food. The time settings are only guidelines and can be adapted to your taste.
Double the time for tough meat. Extend the time by at least 20% for deep frozen food.
•
Open the basket and take the cooked items out of the device.
• Make sure that meat and poultry are thoroughly cooked before serving.
• For preparing smaller portions, it is recommended to place the adjustable airfryer rack A
raised airfryer plate level

CLEANING AND MAINTENANCE

•
Always unplug the power cable when the appliance is not in use or unattended, and before cleaning.
• Never immerse the device in water or any other liquid. The device is not dishwasher proof.
•
Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel
wool, which damages the appliance.
• Allow all parts to dry completely or dry them with a towel.
TROUBLESHOOTING
Problem
The display A does not light
2
up.
The food got burned.
The food is not crispy.
E1
E2
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must
be offered at a central point for the recycling of electric and electronic domestic appliances. This
symbol on the appliance, instruction manual and packaging puts your attention to this important
issue. The materials used in this appliance can be recycled. By recycling of used domestic
appliances you contribute an important push to the protection of our environment. Ask your local
authorities for information regarding the point of recollection.
Support
You can find all available information and spare parts at www.princesshome.eu!
User manual
Possible cause
The power cable is not properly
connected to a working power
outlet.
The appliance is switched off.
The food is left in the appliance
after the cooking time is done.
The food is not evenly spread out. Cook the food according to the
The temperature is set too low.
The temperature sensor is
malfunctioning
The temperature sensor short-
circuited and has to get repaired.
7
on the
5
Possible solution
Plug the power cable into a
working power outlet.
Press the on/off switch. The
display A will become active.
2
Immediately remove the food from
the appliance when the cooking
time is done.
instructions on the packaging of
the food.
Unplug the appliance and wait
for 30 minutes. If you still get the
E-code, please contact customer
service.
Unplug the appliance and wait
for 30 minutes. If you still get the
E-code, please contact customer
service.